ARGH

In this forum you will find and post information regarding the modding of Star Wars Battlefront 2. DO NOT POST MOD IDEAS/REQUESTS.

Moderator: Moderators

Post Reply
Schizo

ARGH

Post by Schizo »

This is really, really, really pissing me off. I just finished fixing all the bugs I could on my Alderaan map. So, I decided to add a little more to the CIS, customize them a bit. So I take the CIS folder, copy it into my world's sides folder, do the basic setup, etc., etc. Everything works fine, everyone's happy, right?

Not at all. There's only one, huge problem, which I can't fix. My Jedi's animations are bugged. Everytime I go to the unit selection screen, he's standing in this wierd pose:

Image

And, as you would guess, when I go to spawn as him, the game crashes. Just great. I finish my map, and all of a sudden my Jedi doesn't work. He was working just fine before I added in the CIS side. So, I took out the CIS side to see what happens, and sure enough, perfectly fine. Put it back in? It's bugged. I've tried everything. I've copied all the lightsaber animations I could find into my World's Animations/SoldierAnimationBank folder. I've copied Obiwan's (which is the animations he should be using) into all the folders I could in the Republic side. But it's still bugged and worse than ever. I have no idea what's wrong. If worse comes to worse, I could just take out the CIS side, but I'd rather keep it. But if this keeps up... I don't know what I'm going to do...

Here's the BF Error Log:

Code: Select all

Opened logfile BFront2.log  2006-03-19 1754
ingame stream    movies\crawl.mvs
prev =     none     iLastPage =     nil
prev =     texture     iLastPage =     1
prev =     texture     iLastPage =     2
prev =     texture     iLastPage =     3
prev =     texture     iLastPage =     4
ifs_legal.Exit

Message Severity: 2
.\Source\GameMovie.cpp(399)
Unable to find open movie segment shell_main

ifs_saveop_DoOps     LoadFileList
ifs_saveop_DoOps     LoadFileList
ifs_saveop_DoOps     LoadProfile
ifs_saveop_DoOps     LoadProfile
num, Selection =    1    table: 03CA116C
+++mission modes changed! ifs_mspc_MapList_layout.SelectedIdx =    1
EraSelection.subst =     c    era_c
play movie    ALD         200    ,    300         510    x    400

Message Severity: 2
.\Source\GameMovie.cpp(399)
Unable to find open movie segment ALD0.000000ly

this.CurButton =    check_mode3
cur_button =    nil
this.CurButton =    check_mode2
cur_button =    nil
EraSelection.subst =     c    era_c
num, Selection =    1    table: 03CA116C
EraSelection.subst =     c    era_c
this.CurButton =    nil
cur_button =    nil
+++ DoubleClicked 
bEra_CloneWar =     1     bEra_Galactic =     1
clonewar_visable =     true     galactic_visable =     false
Adding map:     ALDc_con     idx:     1
play movie    ALD         200    ,    300         510    x    400

Message Severity: 2
.\Source\GameMovie.cpp(399)
Unable to find open movie segment ALD0.000000ly

this.CurButton =    nil
cur_button =    nil
this.CurButton =    Launch
cur_button =    nil

Message Severity: 2
.\Source\HUDElementBitmap.cpp(380)
HUD BitmapElement unable to find texture hud_target_hint_offscreen

Message Severity: 2
.\Source\HUDElementBitmap.cpp(380)
HUD BitmapElement unable to find texture hud_target_hint_offscreen

Message Severity: 2
.\Source\HUDElementBitmap.cpp(380)
HUD BitmapElement unable to find texture btn_directional_pad_LR

Message Severity: 2
.\Memory\RedMemoryPool.cpp(317)
Memory pool "ClothData" set item count after being allocated

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (rep1_inf_pc_com_hostile_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (rep1_inf_pc_com_bacta_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (rep1_inf_pc_com_mechanic_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (rep1_inf_pc_com_ammo_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (rep1_inf_pc_com_transport_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (rep1_inf_pc_com_backup_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (rep1_inf_pc_com_clear_area_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (rep1_inf_pc_com_defend_inVehicle): unknown modifier "InVehicle"

Message Severity: 3
.\Source\EntitySoldier.cpp(10505)
EntitySoldier "rep_inf_default_officer" missing animation bank "clonecommander"

Message Severity: 2
.\Source\EntityGeometry.cpp(1058)
Entity "com_weap_veh_guided_rocket_ord" unknown terrain collision "p_front_sphere"

Message Severity: 2
.\Source\EntityGeometry.cpp(1073)
Entity "com_weap_veh_guided_rocket_ord" unknown vehicle collision "p_front_sphere"

Message Severity: 2
.\Source\EntityGeometry.cpp(1065)
Entity "com_weap_veh_guided_rocket_ord" unknown building collision "p_front_sphere"

Message Severity: 2
.\Source\EntityGeometry.cpp(1051)
Entity "com_weap_veh_guided_rocket_ord" unknown targetable collision "CollisionMesh"

Message Severity: 2
.\Source\EntityGeometry.cpp(1058)
Entity "com_weap_award_rocket_launcher_" unknown terrain collision "p_front_sphere"

Message Severity: 2
.\Source\EntityGeometry.cpp(1073)
Entity "com_weap_award_rocket_launcher_" unknown vehicle collision "p_front_sphere"

Message Severity: 2
.\Source\EntityGeometry.cpp(1065)
Entity "com_weap_award_rocket_launcher_" unknown building collision "p_front_sphere"

Message Severity: 2
.\Source\EntityGeometry.cpp(1051)
Entity "com_weap_award_rocket_launcher_" unknown targetable collision "CollisionMesh"

Message Severity: 3
.\Source\WeaponDispenser.cpp(573)
Dispenser missing entity class "rep_bldg_inf_autoturret"

Message Severity: 3
.\Source\LoadUtil.cpp(829)
Unable to find level chunk rep_hover_barcspeeder in C:\Program Files\LucasArts\Star Wars Battlefront II\GameData\AddOn\ALD\Data\_lvl_pc\SIDE\rep.lvl


Message Severity: 3
.\Source\LoadUtil.cpp(1019)
Unable to find level chunk  in dc:SIDE\rep.lvl


Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_hostile_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_bacta_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_mechanic_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_ammo_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_transport_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_backup_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_clear_area_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_defend_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_hostile_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_bacta_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_mechanic_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_ammo_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_transport_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_backup_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_clear_area_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_defend_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\FLEffect.cpp(214)
FLEffect::Read: duplicate effect class name (5f518933)!

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_hostile_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_bacta_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_mechanic_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_ammo_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_transport_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_backup_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_clear_area_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_defend_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\FLEffect.cpp(214)
FLEffect::Read: duplicate effect class name (5f518933)!

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_hostile_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_bacta_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_mechanic_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_ammo_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_transport_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_backup_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_clear_area_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_defend_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\FLEffect.cpp(214)
FLEffect::Read: duplicate effect class name (5f518933)!

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_hostile_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_bacta_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_mechanic_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_ammo_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_transport_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_backup_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_clear_area_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_defend_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\FLEffect.cpp(214)
FLEffect::Read: duplicate effect class name (5f518933)!

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_hostile_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_bacta_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_mechanic_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_ammo_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_transport_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_backup_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_clear_area_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_defend_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\FLEffect.cpp(214)
FLEffect::Read: duplicate effect class name (5f518933)!

Message Severity: 2
.\Source\EntityGeometry.cpp(1065)
Entity "com_weap_inf_remotedroid_ord" unknown building collision "p_buildingsphere"

Message Severity: 2
.\Source\EntityGeometry.cpp(1073)
Entity "com_weap_inf_remotedroid_ord" unknown vehicle collision "p_buildingsphere"

Message Severity: 2
.\Source\EntityGeometry.cpp(1089)
Entity "com_weap_inf_remotedroid_ord" unknown ordnance collision "p_sphere"

Message Severity: 2
.\Source\EntityGeometry.cpp(1081)
Entity "com_weap_inf_remotedroid_ord" unknown soldier collision "p_sphere"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_hostile_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_bacta_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_mechanic_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_ammo_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_transport_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_backup_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_clear_area_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\VOHelper.cpp(183)
VOSound (cis1_inf_pc_com_defend_inVehicle): unknown modifier "InVehicle"

Message Severity: 2
.\Source\SkyManager.cpp(122)
Skyfile FarSceneRange is in old format

Message Severity: 2
.\Source\StringDB.cpp(48)
ID=f0662079: trying to replace "bes2_bldg_skywaysupport" with "bes2_bldg_skywaysupport6"

Message Severity: 2
.\Source\StringDB.cpp(48)
ID=ef661ee6: trying to replace "bes2_bldg_skywaysupport" with "bes2_bldg_skywaysupport7"

Message Severity: 2
.\Source\StringDB.cpp(48)
ID=ee661d53: trying to replace "bes2_bldg_skywaysupport" with "bes2_bldg_skywaysupport4"

Message Severity: 2
.\Source\StringDB.cpp(48)
ID=f166220c: trying to replace "bes2_bldg_skywaysupport" with "bes2_bldg_skywaysupport1"

Message Severity: 2
.\Source\StringDB.cpp(48)
ID=62fe3d1a: trying to replace "bes2_bldg_courtyard_overlook" with "bes2_bldg_courtyard_overlook1"

Message Severity: 2
.\Source\StringDB.cpp(48)
ID=f3662532: trying to replace "bes2_bldg_skywaysupport" with "bes2_bldg_skywaysupport3"

Message Severity: 2
.\Source\StringDB.cpp(48)
ID=56648359: trying to replace "bes2_bldg_clock_tower" with "bes2_bldg_clock_tower1"

Message Severity: 2
.\Source\StringDB.cpp(48)
ID=98f61c8a: trying to replace "bes2_bldg_large_tower" with "bes2_bldg_large_tower1"

Message Severity: 2
.\Source\StringDB.cpp(48)
ID=ed661bc0: trying to replace "bes2_bldg_skywaysupport" with "bes2_bldg_skywaysupport5"

Message Severity: 2
.\Source\StringDB.cpp(48)
ID=97f61af7: trying to replace "bes2_bldg_large_tower" with "bes2_bldg_large_tower2"

Message Severity: 2
.\Source\StringDB.cpp(48)
ID=11b33b3f: trying to replace "bes2_bldg_16m_outerwall" with "bes2_bldg_16m_outerwall1"

Message Severity: 2
.\Source\StringDB.cpp(48)
ID=4b310423: trying to replace "bes2_bldg_c_mid1" with "bes2_bldg_c_mid10"

Message Severity: 2
.\Source\StringDB.cpp(48)
ID=55e3845b: trying to replace "bes2_bldg_street_lamp" with "bes2_bldg_street_lamp1"

Message Severity: 2
.\Source\StringDB.cpp(48)
ID=ebfd046a: trying to replace "bes1_bldg_console_a" with "bes1_bldg_console_a2"

Message Severity: 2
.\Source\StringDB.cpp(48)
ID=fa663037: trying to replace "bes2_bldg_skywaysupport" with "bes2_bldg_skywaysupport8"

Message Severity: 2
.\Source\StringDB.cpp(48)
ID=12b33cd2: trying to replace "bes2_bldg_16m_outerwall" with "bes2_bldg_16m_outerwall2"

Message Severity: 2
.\Source\StringDB.cpp(48)
ID=eafd02d7: trying to replace "bes1_bldg_console_a" with "bes1_bldg_console_a1"

Message Severity: 2
.\Source\StringDB.cpp(48)
ID=f46626c5: trying to replace "bes2_bldg_skywaysupport" with "bes2_bldg_skywaysupport2"

Message Severity: 2
.\Source\StringDB.cpp(48)
ID=fef584ce: trying to replace "bes2_bldg_c_top" with "bes2_bldg_c_top1"

Message Severity: 2
.\Source\CommandPost.cpp(476)
Label "level.ALD.CP5Label" not localized

Message Severity: 2
.\Source\CommandPost.cpp(476)
Label "level.ALD.CP4Label" not localized

Message Severity: 2
.\Source\CommandPost.cpp(476)
Label "level.ALD.CP1Label" not localized

Message Severity: 2
.\Source\CommandPost.cpp(476)
Label "level.ALD.CP2Label" not localized

Message Severity: 2
.\Source\CommandPost.cpp(476)
Label "level.ALD.CP3Label" not localized

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 4

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 8

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 12

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 16

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 20

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 24

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 28

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 32

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 36

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 40

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 44

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 48

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 52

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 56

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 60

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 64

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 68

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 72

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 76

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 80

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 84

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 88

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 92

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 96

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 100

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 104

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 108

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 112

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 116

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 120

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 124

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 128

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 132

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 136

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 140

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 144

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 148

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 152

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 156

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 160

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 164

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 168

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 172

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 176

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 180

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 184

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 188

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 192

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 196

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 200

Message Severity: 3
.\Source\SoldierAnimatorClass.cpp(1881)
Can't find soldier animation obiwan_sabre_stand_useforce(_upper)


Message Severity: 3
.\Source\SoldierAnimatorClass.cpp(1881)
Can't find soldier animation obiwan_sabre_stand_throw(_upper)


Message Severity: 3
.\Source\SoldierAnimatorClass.cpp(1881)
Can't find soldier animation obiwan_sabre_stand_catch(_upper)


Message Severity: 3
.\Source\SoldierAnimatorClass.cpp(1881)
Can't find soldier animation obiwan_sabre_stand_block_idle(_upper)


Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 204

Message Severity: 3
.\Source\SoldierAnimatorClass.cpp(1881)
Can't find soldier animation obiwan_sabre_stand_attack_backwards(_upper)


Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 208

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 212

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 216

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 220

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 224

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 228

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 232

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 236

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 240

Message Severity: 2
.\Memory\RedMemoryPool.cpp(170)
Memory pool "SoldierAnimation" is full; raise count to at least 244
Can anyone help?
Top
yodaminch

RE: ARGH

Post by yodaminch »

Plo Koon did this too when his animation was wrong. I tried renaming human_sabre and it crashed. It looks like he's loading his saber like a rifle right?
Top
Schizo

RE: ARGH

Post by Schizo »

Exactly. How did you fix it?

If it'll help, here's his ODF file:

Code: Select all

// Obiwan
[GameObjectClass]
ClassParent           = "com_jedi_default"
GeometryName            = "jed_inf_jedi.msh"

[Properties]
AISizeType              = "HOVER"

GeometryName        = "jed_inf_jedi"
GeometryLowRes      = "jed_inf_jedi_low1"
AnimationName           = "obiwan"
OverrideTexture         = "jed_inf_jedi03new"
ClothODF                = "rep_inf_ep3cloakedanakin_cloak"
ClothODF                = "rep_inf_ep3cloakedanakin_skirt"

ScanningRange       = 30.0
TransmitRange       = 300.0

MaxSpeed                = 8.0
MaxStrafeSpeed          = 6.0
MaxTurnSpeed            = 5.0
JumpHeight              = 3.5
RecoverFromTumble       = "1"

NoEnterVehicles     	= 0

//Jet Jump 
JetJump             = "10.0"    //The initial jump-push given when enabling the jet
JetPush             = "0.0"     //The constant push given while the jet is enabled (20 is gravity)
JetAcceleration     = "10.0"    // for characters with jet jump, use this acceleration for in air control
JetEffect           = ""
JetFuelRechargeRate = "0.0" //Additional fuel per second (fuel is 0 to 1)
JetFuelCost         = "0.0" //Cost per second when hovering (only used for jet-hovers)(fuel is 0 to 1)
JetFuelInitialCost  = "0.0" //4initial cost when jet jumping(fuel is 0 to 1)
JetFuelMinBorder    = "0.0" //minimum fuel to perform a jet jump(fuel is 0 to 1)
JetShowHud          = 0
JetEnergyDrain      = 40.0

CollisionScale      = "0.0 0.0 0.0" // don't take damage from collisions
//Jet Jump End

WEAPONSECTION = 1
WeaponName1           = "rep_weap_lightsaber_sadar"
WeaponAmmo1           = 0

WEAPONSECTION = 2
WeaponName2           = "com_weap_inf_sabre_throw"
WeaponAmmo2           = 0
WeaponChannel2        = 1 

WEAPONSECTION = 3
WeaponName3           = "com_weap_inf_forcewave"
WeaponAmmo3           = 0
WeaponChannel3        = 1

//SOUND
//SndHeroSelectable           = ""
//SndHeroSpawned              = "hero_obiWan_spawn"
//SndHeroDefeated             = "hero_obiWan_exhausted"
//SndHeroKiller               = "hero_obiWan_exhausted"

//VOSound = "hero_obiWan_AcquiredTarget      AcquiredTarget"
//VOSound = "hero_obiWan_KillingSpree4      KillingSpree4"

VOUnitType                  = 0181
SoldierMusic                = "cis_hero_Grievous_lp"
HurtSound                   = ""
DeathSound                  = ""
AcquiredTargetSound         = ""
HidingSound                 = ""
//ApproachingTargetSound    = ""
FleeSound                   = ""
PreparingForDamageSound     = ""
HeardEnemySound             = ""
ShockFadeOutTime            = ""
ShockFadeInTime             = ""
ShockFadeOutGain            = ""
ShockSound                  = ""
ClothingRustleSound         = ""
//LowHealthSound          = "com_inf_saber_ambient"
LowHealthThreshold      = "1.1"
FoleyFXClass            = "rep_inf_soldier"
Top
yodaminch

RE: ARGH

Post by yodaminch »

Well here's the thing. I never could I ended up just reinserting the human skeleton and editing the weapon odfs to point to human skeleton. And then he worked.
Top
Schizo

RE: ARGH

Post by Schizo »

... And how would I go about doing that?
Top
yodaminch

RE: ARGH

Post by yodaminch »

Why is anakin's cloth in the odf file? also can you post rep_weap_lightsaber_sadar.odf?
Top
User avatar
Teancum
Jedi Admin
Jedi Admin
Posts: 11080
Joined: Wed Sep 07, 2005 11:42 pm
Projects :: No Mod project currently.
Games I'm Playing :: Destiny
xbox live or psn: No gamertag set
Location: Indiana

RE: ARGH

Post by Teancum »

The solution is simple. It can't find the original Jedi's skeleton. So if you're using Obi-Wan's combos, make sure you load Obi-Wan into the ReadDataFile("SIDE\\rep.lvl" so the game can find Obi's skeleton and animations.
Top
jango232

RE: ARGH

Post by jango232 »

OFF TOPIC how do you convert bf1 to bf2 maps you know how do you get em workin
Top
Schizo

RE: ARGH

Post by Schizo »

Munge Log:

Code: Select all

WARNING[PC_modelmunge msh\rep_inf_jettrooper.msh]:rep_inf_jettrooper has 2379 vertices and NO COLLISION GEOMETRY (WILL BE SLOW)!
WARNING[PC_modelmunge msh\all_inf_luke.msh]:all_inf_luke has 1171 vertices and NO COLLISION GEOMETRY (WILL BE SLOW)!
WARNING[PC_modelmunge msh\jed_inf_jedi.msh]:jed_inf_jedi has 1732 vertices and NO COLLISION GEOMETRY (WILL BE SLOW)!
WARNING[PC_modelmunge msh\rep_inf_arccaptain.msh]:rep_inf_arccaptain has 2031 vertices and NO COLLISION GEOMETRY (WILL BE SLOW)!
WARNING[PC_modelmunge msh\rep_inf_arctrooper.msh]:rep_inf_arctrooper has 2031 vertices and NO COLLISION GEOMETRY (WILL BE SLOW)!
WARNING[PC_modelmunge msh\rep_inf_clonecommander.msh]:rep_inf_clonecommander has 1560 vertices and NO COLLISION GEOMETRY (WILL BE SLOW)!
WARNING[PC_modelmunge msh\rep_inf_ep3anakin.msh]:rep_inf_ep3anakin has 2900 vertices and NO COLLISION GEOMETRY (WILL BE SLOW)!
WARNING[PC_modelmunge msh\rep_inf_ep3armoredpilot.msh]:rep_inf_ep3armoredpilot has 2193 vertices and NO COLLISION GEOMETRY (WILL BE SLOW)!
WARNING[PC_modelmunge msh\rep_inf_ep3cloakedanakin.msh]:rep_inf_ep3cloakedanakin has 3896 vertices and NO COLLISION GEOMETRY (WILL BE SLOW)!
WARNING[PC_modelmunge msh\rep_inf_ep3heavytrooper.msh]:rep_inf_ep3heavytrooper has 2280 vertices and NO COLLISION GEOMETRY (WILL BE SLOW)!
WARNING[PC_modelmunge msh\rep_inf_ep3jettrooper.msh]:rep_inf_ep3jettrooper has 2368 vertices and NO COLLISION GEOMETRY (WILL BE SLOW)!
WARNING[PC_modelmunge msh\rep_inf_ep3obiwan.msh]:rep_inf_ep3obiwan has 2936 vertices and NO COLLISION GEOMETRY (WILL BE SLOW)!
WARNING[PC_modelmunge msh\rep_inf_ep3sniper.msh]:rep_inf_ep3sniper has 4737 vertices and NO COLLISION GEOMETRY (WILL BE SLOW)!
WARNING[PC_modelmunge msh\rep_inf_ep3spacepilot.msh]:rep_inf_ep3spacepilot has 1797 vertices and NO COLLISION GEOMETRY (WILL BE SLOW)!
WARNING[PC_modelmunge msh\rep_inf_ep3trooper.msh]:rep_inf_ep3trooper has 1963 vertices and NO COLLISION GEOMETRY (WILL BE SLOW)!
WARNING[PC_modelmunge msh\rep_inf_feluciatrooper.msh]:rep_inf_feluciatrooper has 1364 vertices and NO COLLISION GEOMETRY (WILL BE SLOW)!
WARNING[PC_modelmunge msh\rep_inf_pilot.msh]:rep_inf_pilot has 2418 vertices and NO COLLISION GEOMETRY (WILL BE SLOW)!
WARNING[PC_modelmunge msh\rep_inf_pilot_low1.msh]:rep_inf_pilot_low1 has 1060 vertices and NO COLLISION GEOMETRY (WILL BE SLOW)!
WARNING[PC_modelmunge msh\rep_inf_trooper.msh]:rep_inf_trooper has 1807 vertices and NO COLLISION GEOMETRY (WILL BE SLOW)!
WARNING[PC_modelmunge msh\rep_walk_oneman_atst.msh]:SplitSkinnedSegments: WARNING: out of space in splitting catalog!
WARNING[PC_modelmunge msh\rep_walk_oneman_atst.msh]:SplitSkinnedSegments: WARNING: resorting to brute force, this may take a while...
WARNING[PC_modelmunge msh\rep_walk_oneman_atst.msh]:SplitSkinnedSegments: WARNING: out of space in splitting catalog!
WARNING[PC_modelmunge msh\rep_walk_oneman_atst.msh]:SplitSkinnedSegments: WARNING: out of space in splitting catalog!
WARNING[PC_modelmunge msh\rep_walk_oneman_atst.msh]:SplitSkinnedSegments: WARNING: resorting to brute force, this may take a while...
WARNING[PC_modelmunge msh\rep_weap_inf_chaingun.msh]:rep_weap_inf_chaingun has 1178 vertices and NO COLLISION GEOMETRY (WILL BE SLOW)!
   0 Errors   25 Warnings

ERROR[PC_modelmunge MSH\bes2_bldg_chamber_shaft.msh]:AddSegment(bes2_bldg_chamber_shaft:shadowvolume): shadow mesh edge 548 / 668 is invalid (edge next == twin == 549)
WARNING[PC_modelmunge MSH\bes2_bldg_court2.msh]:bes2_bldg_court2 has 1503 vertices and NO COLLISION GEOMETRY (WILL BE SLOW)!
   1 Errors    1 Warnings

ERROR[PC_texturemunge world1\aldX.tga]:TextureMunge(aldx:72x72x1): Must have power of two dimensions!
ERROR[PC_texturemunge world1\aldX.tga]:TextureMunge(aldx:72x72x1): Must have power of two dimensions!
 [continuing]
   2 Errors    0 Warnings
Top
Post Reply

Return to “SWBF2 Modding”